SIOUX SSR6P25 Instructions page 3

HOSE AND HOSE CONNECTIONS
The air supply hose recommended is 3/8" (10mm) I.D. If an extension hose is necessary, use 1/2" (13mm) ID hose with couplings not less than 3/8"
(10mm) I.D.
LUBRICATION
For maximum performance and tool life, an air line lubricator, set to deliver 3 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is
recommended.
If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 8-10 drops of air motor oil
and run the tool for 10-20 seconds to distribute oil through the tool.
Lubricate the gears through the grease fitting with Sioux 1232A grease after 100 hours of operation.
MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil
and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.
SOUND AND VIBRATION READINGS
Sound Pressure dBA Sound Power dBA Vibration m/s Uncertainty m/s
Weight Uncertainty 2 2
Catalog No.
(lbs/kg) (dBA)
(per EN ISO 15744) (per EN ISO 15744) (per EN ISO 28927-2) (per EN ISO 28927-2)
SSR6P25 2.7/1.2 TBD TBD TBD TBD TBD
March2/B
Form ZCE779A 3 Date 2017