Front Panel - Ramiaudio AMC250 Manuel Utilisateur

FRONT PANEL

1
1- Left speaker.
2 - Balanced analog Left Input.This input is electronically balanced
(1 Earth , 2 input +, 3 input -)
3 - Balanced analog right Input. This input is electronically balanced
(1 Earth , 2 input +, 3 input -)
4 - Digital input in AES / EBU110 Ohms format.
5 - Digital output in AES / EBU110 Ohms format.
6 - Indicator light of non-standard frequency detection or no digital frame.
7 - Indicator light of standard frequency detection or digital frame presence.
8 - Digital or analog source selector.
 Yellow LED on: The digital source is selected.
 green LED on: the digital source is selected.
9 - Peakmeter on led bargraph (dBu) for the analog input (-16 dBu to+16 dBu) and graduated
in dBFs for the digital input (-32 dBFs to 0 dBFs).
10- Phasemeter on LED bargraph (180° to 0°).
11- Potentiometer to adjust the output modulation (HP and headphones).
12- LED of external mute.
13- left/right Bal. Its middle position is neutral (HP and headphones).
14- 6.35 mm jack for headphones. Inserting the headset inhibits the HP output.
15- ON indicator light.
16- Right speaker.
Rami
IGITAL
ANALOG / DIGITAL MONITORING
ANALOG INPUT DIGITAL IN / OUT
PUSH PUSH PUSH
L R IN OUT
2 3 4 5
9 10
PHASEMETER
180° 90°
AMC 250
PEAKMETER
Analog IN  -16 -12 -8 -4 0 +4 +8
Digital IN
 -32 -28 -24 -20 -16 -12
IN
SELECT
NO
LOCK LOCK
0 10 L
LEVEL
DIGITAL ANALOG
EXT MUTE
6 7 8 11 12
11
0°
Left
Right
+12 +16 dBu
dBFs
- 8 - 4 0
ON
R
BAL
PHONES
13 14 15
16
AMC250