Startup; Operation; Transport - Tornado CVD 30/1 Mode D'emploi

Startup

Installing the filter bag
1. Unlock and remove the filter cover.
2. Turn the filter bag lock to the right to un-
lock.
3. Insert the filter bag and turn the filter bag
lock to the left to lock.
4. Fit and lock the filter cover.
Connecting the main power cable to
the device
1. Open the cable holder at the handle.
2. Plug the main cable provided into the
socket on the device.
3. Secure the plug connection against un-
intentional unplugging using the cable
holder on the handle.
Use only the main cable provided and only
replace it with an equivalent cable in the
case of damage (see "Technical data").

Operation

Adjusting the height of the handle
The height of the handle is adjustable.
See page 4 for illustrations
1. Open the handle adjustment.
2. Move the handle up or down to set the
desired height.
3. Close the handle adjustment.
Switching on the device
1. Connect the main plug.
2. Switch on the device at the main switch.
Roller brush operation
1. Adjust the carpet height using the carpet
height selection knob on the brush head.
2. Perform cleaning.
Using accessories
Vacuum with the crevice nozzle and uphol-
stery nozzle.
See page 4 for illustrations
1. Pull the suction pipe out of the mount.
2. Remove the desired accessory from the
storage compartment and plug it onto
the suction pipe.
3. Perform cleaning.
Suction pipe operation
ATTENTION
Risk of damage!
Do not set the brush head with the rotating
roller to the deep-pile carpet setting when
vacuuming using the suction hose. The
carpet could be damaged or destroyed if
the rotating brush remains in the same po-
sition for a longer period of time.
Switching off the device
1. Switch off the device at the main switch.
2. Pull out the main plug.
The main cable can be stored on the de-
vice.
See page 4 for illustrations
1. Wind the main power cable onto the
winding aid.
2. Wind the main cable around the cable
hook and handle.
3. To remove the cable, open the cable
hook and remove the cable from the
handle.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transportation.
1. Wind the main cable around the cable
storage.
2. Carry the device by the carrying handle.
3. When transporting the device in vehi-
cles, secure it to prevent it from slipping
or overturning in accordance with the re-
spective valid guidelines.
English
Cable storage

Transport

9