Installing Mt400; Connecting Mt400 - Dometic MagicTouch MT400 Instructions De Montage Et De Service

MT400
6

Installing MT400

See fig. 4
➤ Screw the control unit firmly to the vehicle with the screws supplied (B) or use double-sided
adhesive tape (A).
➤ Fix the status LED to the dashboard with double-sided adhesive tape.
7

Connecting MT400

7.1 Connecting MT400 to the power
See fig. 5
No. Designation
1 Indicator relay
2 Interior lighting
3 Diode 1N4002
4 Status LED
5 Door contact switch
6 Right-hand indicator
7 Left-hand indicator
The control unit has the following connections:
Terminal Connection
1 Antenna
2 (not assigned)
3 Status LED
4 Interior lighting
5 Earth, terminal 31
6 Ignition, +12 V, terminal 15
7 Door contact +/–
EN
Terminal Connection
8 Left-hand indicator
9 Battery, +12 V, terminal 30
10, 11, 12 Closed
13, 14, 15 Open
16 Convenience output
17 Convenience input
18 Right-hand indicator
Installing MT400
7