Specifications - Sony SA-W70ES Mode D'emploi

Specifications

For the U.S.A. model
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, from 20 – 150 Hz; rated 180 watts
(SA-W70ES/W705)/130 watts (SA-W505) per channel
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type Active Super Woofer (magnetically shielded
design)
Speaker unit
Woofer: SA-W70ES/W705: 20cm dia. (8 in.) x 2
SA-W505: 20cm dia. (8 in.) x 1
Practical maximum output
U.S.A. and Canada
SA-W70ES/W705: 250 W (50 Hz)
SA-W505: 170 W (50 Hz)
Europe and Malaysia
SA-W70ES/W705: 200 W (8 ohms, DIN)
SA-W505: 130 W (8 ohms, DIN)
260 W (MUSIC)
Other countries
SA-W70ES/W705: 250 W (50 Hz)
SA-W505: 170 W (50 Hz)
Reproduction frequency range
SA-W70ES/W705: 18 – 150Hz
SA-W505: 20 – 150Hz
High frequency cut-off frequency
50 Hz – 150 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: Input pin jack
SPEAKER IN: Input terminals
General
SA-W70ES/W705:
Where purchased Power requirements
U.S.A and Canada 120 V, 60 Hz
Europe and Other countries 220 – 230 V, 50/60 Hz
SA-W505:
Where purchased
Power requirements
U.S.A and Canada 120 V, 60 Hz
Europe and Other countries 220 – 230 V, 50/60 Hz
Power consumption
Dimensions
Mass
Supplied accessories
Optional accessory
Design and specifications are subject to change without
notice.
400 W (MUSIC)
Additional Information
SA-W70ES/W705: 190 W
SA-W505: 130 W
SA-W70ES/W705: Approx. 255 x 630 x 520 mm
(w/h/d) (10 1 / x 24 7 / x 20 1 /
8 8 2
SA-W505: Approx. 255x 380 x 520 mm (w/h/d)
(10 1 / x 15 x 20 1 / in.)
8 2
SA-W70ES/W705: 27 kg (59lb 90oz)
SA-W505: 19 kg (41lb 15oz)
Audio connecting cord
(1 phono plug – 1 phono plug) (1)
Speaker cord (2)
Speaker stand WS-W505(for SA-W505 and
optional speaker SS-T505)
in.)
11 EN