Specifications - Sony SA-WX90 Mode D'emploi

Specifications

For the U.S.A. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, from 20 – 120 Hz; rated 300 watts,
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type Active Subwoofer (magnetically shielded design)
Speaker unit
Woofer: 30 cm dia. (12 in.), cone type
Continuous RMS output
European model (DIN)
300 W
North American and Canadian models (0.8%)
300 W
Other models (0.8%)
250 W
Reproduction frequency range
20 Hz - 120 Hz
High frequency cut-off frequency
50 Hz - 120 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
European model
220 - 230 V AC, 50/60 Hz
Australian model
220 – 240 V AC, 50/60 Hz
Other models
120 V AC, 60 Hz
Additional Information
Power consumption
125 W
less than 1 W (Standby mode)
Dimensions
Approx. 420 × 450 × 540 mm
× 17
5
(w/h/d) (16 /
8
Mass 36 kg (79lb 6oz)
Supplied accessories
Audio connecting cord
(1 phono plug - 1 phono plug) (1)
Speaker cords (2)
Design and specifications are subject to change without
notice.
× 21
3 3
/ / in.)
4 8
11 GB