COMENDA Prime PB24 Serie Instructions Pour L'utilisation Et L'entretien page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Part 2: Reserved for Operator
2.1
PB-PF WASH PHASES
2.1.a Switching on and Preparing machine (Fig. 1)
To switch the machine on, keep
the START (ON/OFF) key pres-
sed for about 5 sec.
The START key turns BLUE.
IMPORTANT
W
hen switched on, the last
cycle selected appears on the
display.
Hot water starts to load automa-
tically from the boiler to the tank.
The START key turns ORAN-
GE.
When the correct water level is
reached in the tank, the START
key FLASHES GREEN.
The ACTUAL temperatures of
the water in the tank and boiler
appear on the display.
When the level is reached, the
heaters switch on fi rst to heat
the water in the boiler and then
in the tank.
IMPORTANT
W
hen the level is reached, the
heaters switch on fi rst to heat
the water in the boiler and then
in the tank.
(example)
ACTUAL
(example)
Press the SCROLL key to go
back.
If no key is pressed, after about
5 sec, the ACTUAL temperatu-
res appear on the display.
When the set temperature is
reached in the boiler and in the
tank, the START key remains
lit STEADY GREEN.
The ACTUAL temperatures
appear on the display.
START
START
START
START
START
START
START
START
START
(example)
SET
START
START
WASH OPERATIONS
Dispensing of detergent and rinse agent is managed
both in the regulation phase and in the restore
phase. The amount of detergent/rinse agent is found
by an authorised technician during installation and
is adapted to the water volume
and hardness.
At each rinse cycle, the machine restores the de
tergent and rinse agent values foreseen by the
manufacturer.
ATTENTION
W
hen the items to be washed have burned encru-
stations or much time has passed before being
washed, they must be soaked in water with an
appropriate emollient product.
Do not use manual washing products as that they
could form suds inside the machine.
Introduce the dish rack into the machine after having
removed solid waste from the objects to be washed.
2.1.b Cycle Selection
The duration of the wash
cycle can be chosen betwe-
en different cycle times
indicated by the respective
symbol:
ECO
GLASSES
(rapid)
(DIN 10511)
selected by touching the SCROLL
key
Every time the key is touched, the cycle to be perfor-
med is displayed and the relevant BLUE LED lights up.
IMPORTANT
W
hen the machine is switched off, the selected cycle
remains stored.
When the machine is switched back on, the last cycle
selected appears on the display.
Extra CYCLE Functions
° C1 (SELF-WASHING)
° C2 (DRAIN)
° C3 (REGENERATION)
ENGLISH
START
DISHES
INTENSIVE
(DIN10510)
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Prime pb34 serie

Table des Matières