Technoline WL 1025 Mode D'emploi page 26


Use the USB adapter to power the monitor and recharge
the built-in battery to avoid losing previously made settings.

In the process of built-in battery charging, the low power
symbol "
symbol is hidden after full.
Manual reset:

Set the power slide to OFF to turn off the monitor and then
move the power slide back to ON to turn on the monitor.
This action will reset the monitor to factory settings.

WL 1025 should not be placed in a polluted environment
for a long time (eg: sealed boxes, contaminated
environments).

Before the WL 1025 is used, it should be placed in a well-
ventilated environment to work for more than 1 hours to
ensure accurate readings.
Troubleshooting:

Do not touch the sensor or don't store the item in
packaging materials with strong smell, so as not to affect
the accuracy of the sensor.

WL 1025 should not be placed in a polluted environment
for a long time (eg: sealed boxes, contaminated
" is displayed scrolling, and the battery
EN11