Introduction; Features; Installation - Montarbo Fiveo MAS 400 Mode D'emploi

INTRODUCTION

First of all, thank you for choosing a product FiveO by Montarbo
® . MAS400 powered subwoofer has been designed for
those who want to set-up a portable and very user friendly audio sound system with excellent performances and outstanding
value despite its very compact size. We manufactured MAS400 to assure you satisfying and reliable operation over many years.
MAS400 is a powered subwoofer, which perfectly suits the needs of small bands, rehearsal rooms and any application where
lower frequencies reinforcement is needed.
Please, in order to enjoy each feature of your new subwoofer thus achieving the best sonic results, take a few moments to
carefully read these instructions.
For further information about your subwoofer, please check our website www.fiveo.it, or send an email to: mail@fiveo.it

FEATURES

The MAS400 is a compact lightweight plywood powered subwoofer designed to successfully being used for any lower
frequencies boost application. Its compact size and wide range of useful controls, make it the perfect choice even for mobile
DJing, as well as concerts, rehearsal room, disco-pub and so on...
In order to give you connection versatility, we included even XLR and RCA discrete Left and Right inputs. The electronic
controls available on upper surface include Xover frequency, Level, Phase and Low-cut, while the internal limiter prevents
any damage from misuse.
∙ Balanced XLR inputs, and unbalanced RCA inputs.
∙ Balanced XLR link outputs.
∙ Phase switch (0°-180°).
∙ Continuously adjustable Xover frequency from 80 Hz up to 180 Hz, 24dB/oct. slope.
∙ Independent Low-cut frequency switch – 125 Hz/80 Hz/Off.
∙ Vented 15 mm plywood enclosure, with anti-scratch texture paint.
∙ Powerful D class amplifier, providing up to 500 W of power.
∙ 305 mm (12") custom woofer with 75 mm (3") voice coil.
∙ Rugged recessed handles for easy and reliable transport.

INSTALLATION

Since your MAS400 contains a power amp, please leave enough space around the unit for cooling purposes. Don't place your
powered subwoofer close to high-temperature devices such as radiators or exposed to direct sunlight. MAS400 is connected
to the mains via the supplied cable. First connect the mains cable to the unit, then connect the cable plug to the mains,
finally turn on your MAS400.
Please note that all units must be properly grounded. For your own safety, you should never remove any ground connector/
device from electrical devices or power cables, or make them inactive. Please ensure that only qualified people install and
operate the powered subwoofer.
The internal temperature is lowered inside the cabinet by fan continuously blowing on the power amplifier. Anyway, since
MAS400 power amplifier is very powerful and needs a good ventilation, don't place the sub in dusty places or narrow corners.
The ventilation takes place by means of some slots placed at both ends of cabinet panel, so be careful not to block the
ventilation openings with any object.
Owner's manual |
4