Introduction; Intended Use; Features; Package Contents - Mistral MSP 12 A1 Traduction Des Instructions D'origine

SUP PUMP MSP 12 A1

Introduction

Congratulations on the purchase of your new
appliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified range of applications. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is designed for inflating SUP boards
in conjunction with the supplied adapter. The appli-
ance is not suitable for the operation of pneumatic
tools. Any other usage or modification of the appli-
ance is deemed to be improper and carries a
significant risk of accidents. The manufacturer
accepts no responsibility for damage resulting from
improper use. The appliance is not intended for
commercial use.
NOTE
► Store these operating instructions in the imme-
diate vicinity of the appliance and make them
available to all operators.
■ 2 │ GB │ IE │ NI

Features

Carrying handle
Selection button
"−" button
"+" button
ON/OFF switch
Display
4x feet on the underside of the appliance
Elastic band
Deflation connection
12 V Vehicle connector plug
Inflation connection
Adapter connection for the hose
High-pressure attachment
Mini-Boston valve adapter
Boston valve adapter
Hose
Lock connection for the hose

Package contents

1 SUP pump (incl. 12 V vehicle connector plug
and connection hose)
1 Boston valve adapter
1 mini-Boston valve adapter
1 high-pressure attachment
(middle silicone seal pre-assembled,
small and large seals also included)
1 set of operating instructions
Technical specifications
Nominal voltage
Rated Speed
Operating pressure
Air flow rate (pump)
Operating mode
Weight
Vehicle connector plug
Fuse
12 V , 110 W (DC)
3800 rpm
Max. 1.38 bar (20 PSI)
approx. 350 l/min
S2 Short-term opera-
tion with constant
load, for a duration of
10 minutes.
1.68 kg
15 A
MSP 12 A1