Troubleshooting; Storage; Disposal - Mistral MSP 12 A1 Traduction Des Instructions D'origine

Troubleshooting

Fault Solution
Check the power source. Check
that all cables, fuses and the mains
socket are in working order.
The appli-
ance does
Do not use the appliance at
not work
temperatures below 5°C.
Avoid overheating the motor.
Allow the motor to cool down.
Check if the hose is clogged or
cracked.
Slow or
abnormal
The connection between the hose
inflation
and the appliance is not properly
installed.

Storage

■ Unplug the vehicle connector plug.
■ Store the appliance in a dry and secure environ-
ment.
■ Ensure that the appliance has cooled down
completely, otherwise there is a risk of burns.
■ Store the appliance so that it cannot be used by
unauthorised persons.
■ 8 │ GB │ IE │ NI

Disposal

The packaging consists of environ-
mentally friendly material. It can be
disposed of in local recycling
containers.
Do not dispose of power tools
in the normal domestic waste!
According to European Directive
2012/19/EU, used power tools
must be collected separately and recycled in an
environmentally sound manner.
Your local community or municipal authorities
can provide information on how to dispose of the
worn-out appliance.
Dispose of the packaging in an environ-
mentally friendly manner. Observe the
labels on the different packaging mate-
rials and separate them as needed. The
packaging material is labelled with abbreviations
(a) and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The product is recyclable, subject to
extended producer responsibility and is
collected separately.
MSP 12 A1