Using The Radio Feature; Using The Voice Recorder Feature - Samsung M197DF Mode D'emploi

Using the Radio Feature

When you plug the power cable, the unit is initialized to MWO Mode.
"MWO" and will be displayed on the screen.
If there is a recorded message, "Play" icon appears on the screen at
that time.
To listen to the radio,
1. Press Radio / MWO select (On/Off) button.
Result :
2. Press Tuner More/Less button (
desired channel.
• Pressing the button for less than 1 second increases
or decreases the frequency by 50KHZ (or 100KHZ).
• Pressing the button for more than 1 second button
runs automatic turning function with a short beep
sound. When it finds a channel, automatic turning
function stops searching.
• Pressing the button continuously increases or
decreases frequency until you Key off.
You can listen to only FM channels within the
frequency range of 87.50MHZ~108.00MHZ.
3. Turn the Radio Volume Dial to a comfortable volume..
You can enter the Radio mode only during clock mode or MWO
cancel mode.
While the unit is in Radio Mode, the operation of MWO START, Dial,
or MWO function button switches the unit to MWO Mode immediately,
and the red backlight of the screen is turned to green. In this case, you
can listen to the current channel on the radio. (The operation of MWO
while listening to the radio, may make a noise that does not mean the
unit is out of order. In this case, please try to change the antenna
direction.)
The radio Usable sensitivity is different in accordance with installed
area, So move the MWO th other place or change the direction of
antenna
If the antenna is pulled strongly, it may be broken down
The green backlight of the screen is turned to
red, "Radio" icons appears on the top and
"FM" and "MHZ" icon appear on the bottom of
the screen, and the current frequency of the
channel is displayed on the screen.
The frequency of the channel appeared on the
screen is the frequency of the last channel.
) to select your

Using the Voice Recorder Feature

You can leave a short message for your family members using this
function.
To leave a message,
Press Voice Rec button.
Result :
To stop recording while operation, press Voice Rec button. You can
record a message up to 20 seconds.
If the unit is not in the Child Look status, you can record a message.
11
1) Upon pressing the button, "Rec" icon and
appears on the top of the screen,
recording begins, and the time on the
screen decreases by the second.
2) When recording is completed, the screen
returns to the previous status. (The screen
returns to clock, or radio mode.)
Then, the "Play" icon on the top of the
screen would blink. (If you have listened to
the recorded message, the "Play" icon
stops blinking.).
GB