Operation - Klarstein SHIRAZ 12 SLIM Mode D'emploi

OPERATION

Setting the Temperature Control
• Your wine cooler has been equipped with an"automatic"control panel lock that
will activate 20 seconds after the last time a button has been touched.
• Push button for 2 second. The degrees will appear in blue colour in the
temperature display window.
• When the control panel is active, push button
display will be off;
• You have to push the button again and the LED temperature display will turn back
on.
• You can set the temperature as you desire by pushing button
that you desire to set will increase 1 °F or 1 °C if you push the button once
• You can set the temperature as you desire by pushing button
that you desire to set will decrease °F or 1 °C if you push the button once.
Energy saving tips
• The unit should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the unit. Overloading the
unit forces the compressor to longer.
• Be sure to wrap foods properly and wipe containers dry before placing them in
the unit.
• This cuts down on frost build-up inside the unit.
• Unit storage bin should not be lined with aluminium foil wax paper or paper
towelling.
• Liners interfere with cold air circulation making the unit less efficient.
• Organize and label food to reduce door openings and extended searches.
Organize and label food to reduce door openings and extended searches.
Remove as many Remove as many items as needed at one time items as needed
at one time and close the door as soon as possible and close the door as soon as
possible.
and the LED temperature
he temperature
The temperature
EN
23