Table des Matières
Publicité
Installation
18
Installation dans une usine de Charme (Metal) Cheminée
The log grate,
screen (and rails),
and doors (if
present) must be
removed.
NOTE: The fixed spacers
under the appliance may not
be removed.
You may remove the leveling bolts and
attach telescoping legs to support the
insert on raised fireplaces.
© Travis Industries
(For Qualified Installers Only)
"L" Vent
Cover Plate (non-combustible)
The metal floor of the firebox may
be removed leaving he fireplace
floor outer wrap.
Vertical Cap
Storm Collar
Seal the cover
plate with silicone.
4130129
"L" Vent Flex Section
The smoke shelf, shields,
damper, and baffles may
be removed if attached
with mechanical
fasteners.
The firebrick (refractory)
may be removed.
HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors from
entering the home.
The metal sides, frame members, or other
structural components of the factory built
fireplace may not be removed or altered.
100-01341
Publicité
Table des Matières
