System Overview - Contacta IR-TX2 Guide D'installation Et D'utilisation

System Overview

The IR-TX2 two-channel infrared transmitter combines infrared modulator
and emitter technology into a single mountable enclosure - which reduces
operating costs, eliminates the need for rack space and eases set-up.
EN
The IR-TX2 is ideal for high-quality audio programs such as music, theater
and audio description. The IR-TX2 will accept any line level, balanced or
unbalanced audio inputs.
Infrared receivers detect the transmission and convert the light signal
back into audio signals. The 2.3/2.8 MHz operating frequencies minimize
interference caused by high-efficiency lighting equipment.
A further IR-TX2 emitter can be connected for additional coverage area.
Power and audio signal are shared between the emitters via the according
connection cables. All necessary cables are included.
No FCC license or radio approval is required with this equipment. It can be
used anywhere in the world.
Attention:
This equipment has been tested and found to comply with the according
EC-regulations. The limits stated therein are designed to provide reason-
able protection against harmful interference when the equipment is oper-
ated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause interference
in which case the user will be required to correct the interference at his
own expense.
Please note:
Sunlight, a plasma monitor or television can degrade the audio quality of
the IR-TX2 transmission.
For best performance, the transmitter should be positioned as far away
as possible from any exposure to the sun, plasma monitor or television.
English 5