Combined mode
As previously described, a further IR-TX2 can be added as a secondary
transmitter, in order to achieve a larger coverage area within larger facili-
ties.
Connecting the two IR-TX2:
Power supply:
Use the included power connection lead to connect the "DC-Out" socket of
the first IR-TX2 (primary transmitter) with the "DC-In" socket of the second
IR-TX2 (secondary transmitter).
Audio signal:
Use the included audio connection lead (3,5 mm stereo jack, on both
ends) to connect the "sync out" port of the primary transmitter with the
"sync in" port of the secondary transmitter.
After the two IR-TX2 have been connected with each other, the Line-In
level indicator lights on both transmitters should light up simultaneously.
Figure 7:
Connecting two IR-TX2 for combined mode
Audio source RCA
Microphone
(Electret type)
AC Power
supply
IR-TX2 transmitter #1
(primary transmitter)
IR-TX2 transmitter #2
(secondary transmitter)
Connection
cable - power
Connection
cable - audio
EN
English 11