Adjust The Audio Level - Contacta IR-TX2 Guide D'installation Et D'utilisation

Figure 6:
Wiring scheme:
Symmetric Line-Out port (XLR) to IR-TX2 RCA Line-In adapter cable
FEMALE XLR
RED
(IN PHASE)
BLACK (SIGNAL)
1= SHIELD, 2= RED (SIGNAL IN PHASE), 3=BLACK (SIGNAL)

Adjust the Audio Level

Line Level Source
After an audio signal has been connected to the transmitter, adjust the
audio source gain until the IR-TX2 audio-level indicator for that channel
blinks periodically.
Microphone Source
Speak into the microphone from a normal distance and at a natural voice
level. Use the microphone gain adjustment on the IR-TX2 to set the gain
to the point where the audio level indicator on the selected channel blinks
periodically. If the audio level indicator is always on or on most of the
time, the level is too high. If the audio level indicator is never on, the level
is too low.
10 English
2 CONDUCTOR
WITH SHIELD
BLACK
RCA
RED
(TIP=IN PHASE)
TO IR-TX2
SHIELD NOT CONNECTED
ON IR-TX2 CABLE END