Transmitter Safety Warnings - Contacta IR-TX2 Guide D'installation Et D'utilisation

Transmitter Safety Warnings

Warning!
To reduce the risk of fire or electric shock, do not expose the system to rain
or moisture. Do not use this apparatus near water. The system should not
be exposed to dripping or splashing, and objects filled with liquids such
as beverages should not be placed on the transmitter or receivers. Clean
only with a dry cloth.
Servicing or attempting to service this device will void the warranty!
• Refer servicing to qualified personnel. Servicing is required when the system
has been damaged in any way: if liquid has been spilled or objects have fallen
into the unit, if the unit has been exposed to moisture, if the unit does not ope-
rate normally, or if the unit has been dropped.
• Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat sinks, stoves, or
other apparatus that produces heat.
• Use only attachments / accessories as specified by the manufacturer.
• Unplug the transmitter during lightning storms or when unused for long peri-
ods of time.
• Be advised that different operating voltages require the use of different types
of line cord and attachment plugs. Check the voltage in your area and use the
correct type.
• Use only the power supply provided by Contacta. Other power supplies may
have similar specifications, but may not be equivalent in emissions ratings, in-
rush current, etc.
• Use of an unapproved power supply may leave the device partially or comple-
tely inoperable, and will void the warranty.
• Protect the power cord from being walked on or pinched, particularly at plugs,
receptacles, and near the power jack on the transmitter.
• The mains plug or a switchable appliance coupler can be used to disconnect the
device, so the disconnecting plug / coupler should remain easily accessable.
4 English