Greenlee Intelli-PUNCH Mode D'emploi page 11

Setup and Operation (cont'd)
MILD STEEL
Punching Mild Steel
• Square: 1.811" to 2.677" (46.0 mm to 68.0 mm)
• Rectangular: 1.312" x 2.625" to 1.378" x 2.559"
(33.3 x 66.7 mm to 35.0 mm x 65.00 mm)
60235
3/4" Counter Nut
Punching Mild Steel
• "D" Punches
• Double "D" Punches
• Key Punches
Counter Nut
Punching Mild Steel
• Electronic Connector
Panel Punches
04638
3/8" Counter Nut
Greenlee / A Textron Company
Pilot Hole
Punch
Draw Stud
Die
Pilot Hole
Punch
34421
3/8" Draw Stud
Die
7/16" (11.1mm)
Pilot Hole
Punch
11
Intelli-PUNCH™ Knockout Driver
60118
3/4" Draw Stud
End with Long Threads
Die
Adapter
03248
Spacer
End with Long Threads
33967
3/8" Adapter
03248
Spacer
End with Long Threads
Threads with Flats
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070