Product Dimensions; Cabinet Clearances - Electrolux ECCG3672AS Instructions D'installation

36" GAS RANGETOP INSTALLATION INSTRUCTIONS

Product Dimensions

A
912.4 mm
max: 688 mm
1
B
min: 681.5 mm
C
190.5 mm
D
46.5 mm
E
604 mm
F
241 mm
1. Dimension B and clearance G (next table) varies
according to the presence of the rear spacers
and its screws: the maximum is obtained with the
rear spacer and the minimum without it. The rear
spacer can be removed in case of island installa-
tion or if the back wall is non-combustible.
NOTE: Clearances from non-combustible materi-
als are not part of the ANSI Z21.1 scope and are
not certified by CSA.
If removing the rear spacers remove its screws as
well. The total thickness of the spacers and the
screw heads is 0.256" (6.5 mm).
35 15/16"
max: 27 1/8"
min: 26 13/16"
7 1/2"
1 13/16"
23 12/16"
9 1/2"
4

Cabinet clearances

F
914 mm
max: 619 mm
1
G
min: 612.5 mm
H
min. 508 mm
I
min. 457 mm
J
K
max. 330 mm
L
max. 330 mm
M
min. 914 mm
N
190.5 mm
Clearance J can have the following values:
• J = 36" / 914 mm minimum clearance between
the top of the cooking surface and the bottom of
an unprotected wood or metal cabinet.
• J = 30" / 762 mm minimum when the bottom of
wood or metal cabinet is protected by not less
than 1/4-inch-thick flame-retardant millboard cov-
ered with not less than No. 28 MSG sheet steel,
0.015-inch-thick stainless steel, 0.024-inch-thick
aluminum, or 0.020-inch-thick copper. Clearances
from non-combustible materials are not part of the
ANSI Z21.1 scope and are not certified by CSA.
Clearances of less than 30'' should be approved
by the local codes and/or by the local authority
having jurisdiction.
36"
max: 24 3/8"
min: 24 1/8"
min. 20"
min. 18"
see notes below
max. 13"
max. 13"
min. 36"
7 1/2"