Fripac Mondial K-4229 Notice D'emploi page 17

Setting the temperature
The styling has 13 temperature settings from 100 °C to 220 °C. The
preset temperature is 180 °C. Repeatedly press the ‚+' button to increa-
se the temperature in steps of 10 °C. Repeatedly press the ‚-' button to
reduce the temperature in steps of 10 °C.
Lower temperatures are suitable for fi ne or colour-treated hair. Strong
hair may require higher temperatures. It is best to begin the treatment
at a low temperature and increase the temperature as needed.
Selecting the direction of rotation
Your styling brush has two direction of rotation settings:
L Left
R Right
The direction of rotation affects the direction the curl falls (toward the
face or away from the face).
TIP: For a less uniform and more natural look, alternate turning the
sections of hair left and right.
Operating instructions
Warning! The device is not suitable for artifi cial hair or extensions.
Only use on clean, dry or slightly damp hair. Do not use in wet hair. Do
not use in combination with styling products such as gel or hair spray.
You should comb your hair well before use so that it is free of tangles.
If necessary, use a detangling brush such as the Denman Tangle Tamer
Ultra.
Plug the mains cable of the device into the socket. The text ‚OFF' will
appear in the LCD display.
Press the ‚⏻' button. The device will heat up. You can monitor the
progress of the temperature on the LCD display.
16 - EN - User Manual K-4229