GoodHome Sondrio 3663602437543 Mode D'emploi page 41

Installation
Power
BCD*
App. width
App. height
*BCD (H)
* BCD = Between centres distance
1. Unlock the wall bracket by turning the safety locks
clockwise using a screwdriver and then remove the
bracket from the appliance (Fig. D).
2. Position the wall bracket against the wall, taking care to fit
it in the right direction, with the bottom lugs on the floor,
and mark the hole (Item C Fig. D).
3. Place the hole in the wall bracket (Item B Fig. D) in line
with the line previously marked on the wall (Item C Fig. D).
Make sure the bracket is even by using a spirit level. Mark
the holes in the bottom and top lugs. Drill the diameter
corresponding to the wall plugs and screws.
4. Fix the wall bracket to the wall using 4 screws (dia. 6 mm
max.) - Fig. D.
5. Position the appliance on the bottom lugs of the wall
bracket and straighten it up until it fits into the top lugs.
6. Lock the wall bracket by turning the safety locks anti-
clockwise using a screwdriver (Fig. D).
182969_s1_s1_ 3663602437505_GOODHOME_A5_IM_Multi_V11.indb 40 182969_s1_s1_ 3663602437505_GOODHOME_A5_IM_Multi_V11.indb 40
1500 W 2000 W
160 mm 240 mm
419 mm 499 mm
1494 mm 1494 mm
1294 mm 1294 mm
40
08-06-2020 15:16:19 08-06-2020 15:16:19