Introduction; Unpacking And Pre-Installation - Ecco 10 Serie Instructions D'installation Et D'utilisation

!
WARNING!
Failure to install or use this product according to manufacturer's recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety
information contained in this manual.
1. Proper installation combined with operator training in the use, care and maintenance of emergency warning devices are essential to
ensure the safety of emergency personnel and the public.
2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical
connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current
arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of
the system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system
without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator
should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors),
people, vehicles or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, drive
against traffic, respond at a high rate of speed, or walk on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws
regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations.
The manufacturer assumes no liability for any loss resulting from the use of this warning device.
8. This product may contain high intensity LEDs staring directly into these lights could result in temporary and/or permanent vision
impairment.

Introduction:

The ECCO 10, 15, 20 and 30 Series Lightbars are versatile and powerful warning devices suitable for a range of vehicle types and duties.
There are numerous options and lengths available for each series of lightbar. The lightbars can either be mounted permanently to the ve-
hicle or mounted using the vehicle roof gutters. All series also utilize a one-piece top lens set for easy opening, along with a plug-in wiring
harness and access hole to allow easy removal of the lightbar without uninstalling the wiring harness.
10 Series Lightbar
The unique shape of the 10 Series Lightbar ensures a sleek, low profile body hugging fit for many vehicle applications. In addition to the
long, maintenance free service life and low current draw benefits of LED technology, the single deck 10 Series also supports additional aux-
iliary lighting options, including the Safety Director and unique Cleversector. Featuring an aluminum base and clear, weatherproof, polycar-
bonate housing along with encapsulated electronic control modules, the lightbar is strong, durable and protected against the environment.
15 Series Lightbar
The 15 Series offers the long, maintenance free service life and low current draw benefits of LED technology along with increased light
dispersion thanks to the unique optics of the LED light heads. This stylish, low profile single deck lightbar features an aluminum base and
clear, weather-proof, polycarbonate housing along with encapsulated electronic control modules to provide strength, durability and protec-
tion against the environment.
20 Series Lightbar
The unique shape of the 20 Series Lightbar ensures a sleek, roof-hugging fit for many vehicle applications. The twin deck design features
an aluminum base and hinged, polycarbonate lens for durability and ease of maintenance. In addition to allowing unobstructed light output
from the primary warning lights on the upper deck, the 20 Series also supports many additional lighting options including an integral Safety
Director and unique Cleversector on the lower deck.
30 Series Lightbar
The twin deck design of the 30 Series Lightbar maximizes lighting options allowing unobstructed light output of the primary warning lights on
the upper deck and offering various auxiliary lighting options on the lower deck, including an integral Safety Director. Featuring an alumi-
num base and hinged, polycarbonate lens for durability and ease of maintenance, the 30 Series is available in a wide range of configura-
tions.

Unpacking and Pre-Installation:

Carefully remove the lightbar and place it on a flat surface. Examine the unit for transit damage and locate all parts. If damage is found or
parts are missing, contact the transit company or ECCO. Do not use damaged or broken parts.
Ensure the light bar voltage is compatible with the planned installation.
920-0052-00 Rev. F Page 2 of 17