Quax INDIGO 540454 2D Serie Manuel page 37

INDIGO
540454xx-2D
Step 6 : Use the parts of step 5, the intermediate side EB3, eight wooden dowels F, eight eccentrics H,
twelve shelves supports K and two clothes rail holders R
Insert two wooden dowels (F) in the drillings beneath and above the intermediate side (EB3). Push four
wooden dowels (F) in the holes on the front of the side. Push three eccentrics (H) in the drillings at the top
of the side. Push fi ve eccentrics (H) in the holes on the front of the side. Push six shelf supports (K) in the
drillings on both sides of the side and make sure they are at the same height. Push the clothes rail holders
(R) in the holes on the top of the side.
Step 7 : Use both sides EB2 LH and EB2 RH, four wooden dowels F, six connectors G, four nuts E, six
eccentrics H, six hinge mounting plates N, twelve shelves supports K and two clothes rail holders R
Push two wooden dowels (F) in the drillings on top of the sides (EB2 LH and RH). Push three eccentrics
(H) in the holes on top of the sides. Push two nuts (E) in the drillings at the bottom of the sides. Tighten
three connectors (G) in the holes at the bottom of the sides. Attach the hinge mounting plates (N) with the
provided screws in the drillings at the bottom, in the center and at the front of the sides. Push six shelf
supports (K) in the drillings on both sides of the side and make sure they are at the same height. Push the
clothes rail holders (R) in the holes on the top of the side.
Kleerkast met twee draaideuren
Schrankwand mit zwei Türen
Armoire avec 2 portes battantes
Wardrobe with two doors
Quax Quax
First dreams First dreams
® ®
First steps First steps
37