EGAmaster 79612 Manuel D'instructions page 32

hair or gloves can get caught up in the machine tool or accessories and thus cause
severe injuries (lack of breath by throttling, abrasions, skin injuries and/ or cuts and
lacerations)
forbidden, respectively.
SAFETY INSTRUCTIONS FOR PREVENTION OF NOISE HAZARDS
to any other person within the vicinity of the machine. Observe the instructions of the
employer and of the professional association.
as tinnitus (ringing, buzzing, whistling or humming in the ears), hardness of hearing
or even deafness.
• Before starting work, ensure that the provided, respectively the factory-made,
• If possible, use sound absorbing material, in order to avoid ringing noise at the
SAFETY INSTRUCTIONS FOR PREVENTION OF VIBRATION HAZARDS
Vibrations can cause disabling damage to the nerves and blood supply of the hands and arms.
• Wear warm clothing and keep your hands warm and dry when working in cold conditions. Exercise
hands and fingers regularly.
• Do not hold the machine tool with the free hand
• Use stands and/or weight balancers, if possible.
• When using a support (e.g. stand) make sure the machine is securely fixed. If no support is used,
hold the machine with light but safe grip in order to support the tool's reaction torque. The tighter the
grip the greater the risk from vibrations.
• Mount the machine as described in the operating instruction booklet in order to avoid unnecessary
high vibrations.
• Stop work immediately, if you feel any numbness, tingling, pain or whitening of fingers or hands.
Inform the employer and consult a doctor.
32
SAFETY INSTRUCTIONS FOR PREVENTION
OF ENTANGLEMENT HAZARDS
CAUTION – Loose clothing, personal jewellery (e.g. necklace), scarves/ ties, long
Wear suitable, close fitting work clothing!
Wear a hair net, if you have long hair.
When handling the machine, jewellery, necklaces, etc. have to be removed or are
Always wear hearing protection (EN 352) – This refers to the operator, as well as
High noise levels during operation can cause permanent hearing problems such
sound absorbers are mounted and in proper condition.
work pieces.