Specifications - LD Systems AM 8 Série Manuel D'utilisation

2
Click on the button of the channels (CHANNEL 1-8 / MASTER 1 + 2) to be grouped in this channel group.. The buttons of the selected channels
are highlighted in yellow. To remove a channel from a group, click on the button of the corresponding channel, the button will appear greyed out.
Input and output channels can not be grouped in a channel group.
3
Click on the buttons for the features that should be applied to all channels in this channel group. The buttons of the selected features are
highlighted in yellow. For example: The mute function is enabled for input channels 1 to 3, which are combined in Group 1 (GROUP 1). Now
switch channel 1 in the Group to mute (MUTE), channels 2 and 3 will also be automatically muted. Features available within a group: Input
channels 1 to 8, GAIN, MUTE, PRIORITY, PHANTOM, EQ / output channels Master 1 and 2, GAIN, MUTE, EQ, LIMITER.
4
To confirm the input and to complete the process, click OK, to cancel click CANCEL.

SPECIFICATIONS

Model Name:
Product Type:
Type:
Version:
AD/DA Converter:
Sampling Frequency:
DSP:
Frequency Response:
Signal/Noise Ratio:
Noise Level:
THD:
Channel Crosstalk:
Controls:
Display Elements:
Line / Mic Inputs:
Line / Mic Input Connections:
MIC Input Sensitivity:
MIC Input Impedance:
Phantom Power Mic Inputs:
Input Sensitivity Line:
LINE Input Impedance:
Maximum Line Input Level:
Analogue Line Outputs:
Analogue Line Output Connections:
Output Impedance:
Maximum Line Output Level:
Digital Line Outputs:
Digital Line Output Connections:
Interfaces:
Interface Connection:
Other Connections:
Max. Number of Daisy-chained
Units:
22
LDAM8
automatic mixer
digital
8 inputs, 2 outputs
24-bit
96 kHz
EQ, Gain control, 8 x 2 Matrix, Dynamic control (Compressor/Limiter), Automix
20 - 30,000 Hz
85 dB
-120 dBu
< 0.02 %
87 dB
8 x multifunctional encoder (CH1 - CH8), 1 x multifunctional encoder Master, 1 x multifunctional
encoder Threshold, Reset button
8 x multifunctional LED display (CH1 - CH8), 1 x multifunctional LED display Master, 1 x multifunc-
tional LED display Threshold
2 x 6-segment level LED display Master 1 + 2, Power LED
8 (Line / Mic switchable)
terminal block balanced
8.7 mV
2 kOhm
48 V (individually switchable)
-20 dBu
8.4 kOhm
+20 dBu
2 (Master 1 + Master 2)
terminal block balanced
100 ohms
+20 dBu
1 (AES/EBU)
terminal block
RS-232, RS485
D-SUB 9-pin, RJ45
LINK IN / LINK OUT (Mini-DIN 4-pin), EXTERNAL CONTROL (D-SUB 25-pin)
16