Pair Length - Fluke Networks MICROSCANNER PRO Mode D'emploi

MICROSCANNER
3. When MICROSCANNER displays PC and
the cable length, press the MODE key to
activate the blinking Hub light.

Pair Length

If are displayed, you will be able to show
detailed pair information for each standard
conductor pair.
1. Press the
2. Press the
pair combinations.
The pair length is not measured if the cable is too
long, connected to a hub, or a wiremap adapter is
used.
Pair 1 - 2 Length
key to display Pair 1 - 2 length.
key again to display the other
ENGLISH - 14
Pair 1 - 2
not measurable