Recall Function; Chime Sounds; Chime Position - FRIEDLAND Libra plus D917S Manuel D'utilisation

Recall function

A short push of the
was last in use.

Chime sounds

To hear the chime sounds without operating the
bell push, press the
again and the tune will change.
Troubleshooting
A 'beep' sound is heard in learn mode...
¬ The push you are programming has already been learnt by the chime.
¬ If you want to change the icon associated with the push, use the un-learn procedure, then
programme the push again.
Two 'beep' sounds are heard after the normal chime sound...
¬ This indicates a low battery in the bell push that activated the chime. Fit a new battery, type CR2032.
When the bell push is operated, the amber confidence light does not turn on, or is only
on for a short time...
¬ In normal operation, the amber light will turn on for 1 second. When the battery is weak,
the light will only turn on for a short time. Fit a new battery, type CR2032.
button will flash the icon that
button. Press the button

Chime position

The Chime can be free standing or wall mounted
using the wall bracket provided. If wall mounting is
preferred, screw the bracket to the wall (see Fig 5).
The Chime hooks onto the wall bracket as illustrated.
Fig. 5
5