Hamilton Beach 63245 Manuel D'instructions page 11

Troubleshooting
Meat and Food Grinder not extruding or working.
• Make sure Stand Mixer is plugged into outlet and turned to recommended speed.
• Unplug Stand Mixer. Check to see if all parts are installed properly and Collar is tightened onto Housing.
• Unplug Stand Mixer and check if food is stuck in Grinder Chute. Cut food into 1-inch (2.54 cm) thick strips.
• Unplug Stand Mixer, disassemble all parts, and check for blockage. Remove blockage and reassemble parts to start grinding again.
Food is not extruding evenly from Grinding Plate.
• Make sure there is enough food in Grinder Chute to process.
• Slightly increase speed to and check extruding.
• Turn Stand Mixer and ensure Collar is tightly screwed onto Housing.
Other Hamilton Beach Professional Power Hub Accessories Available:
Spaghetti
Cutter
Pasta
Roller
Fettuccine
Cutter
Model 63246: Pasta Roller and Cutter Set Model 63247:
Slicer/Shredder
11