Included With Your Pc Oscilloscope; System Requirements - Omega SCOPE OMSP-2000 Serie Mode D'emploi

USB Oscilloscope Quick Start Guide
Safety grounding
The ground of every product is connected directly to the ground of your
computer through the USB cable supplied. This is done in order to minimise
interference. Therefore, always use the supplied cable to attach the product to
your computer.
As with most oscilloscopes, take care to avoid connecting the ground input of
the product to anything which may be at some voltage other than ground. If
in doubt, use a voltmeter to check that there is no significant AC or DC
voltage between the oscilloscope ground and the point to which you intend to
connect it. Failure to check may cause damage to the product or computer
and could cause injury to yourself or others.
You should assume that the product does not have a protective safety earth.
1.3

Included with your PC Oscilloscope

Please check that your PC Oscilloscope package contains the following items:
 1 PC Oscilloscope
 1 USB cable
 1 Software CD
 1 Installation guide
Some product packs and scope bundles may contain additional items.
1.4

System requirements

Please verify that your computer meets the following requirements.
 Pentium or equivalent PC with at least 32 MB RAM, 10 MB disk space
 Microsoft Windows XP SP2, Vista or Windows 7
 USB 1.1 compliant port minimum. USB 2.0 compliant port recommended.
Free USB port on PC or powered USB hub. Will not work on a passive hub.
2 M5063