Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN SENSORS- Mode d'emploi / User guide version V2.0
•
Clip the electronic board onto the casing's base. Make sure that the fastening clip is properly locked into the board's fitting.
Fastening clip
•
Insert the upper part of the casing. Inside this part there are guide rails for the board. Make sure that the board is properly positioned
within these guides.
•
Once the board is in position, lower the upper cover and lock it onto the casing's base. Strong pressure will enable both parts to be clipped
together and will enable protection level IP67 to be ensured.
Locking clips for the
upper casing
Fitting
GB
Page
37
of 45
Publicité
Table des Matières
