Product Presentation; General Description - Adeunis RF LoRaWAN ARF8045PAG Mode D'emploi

LoRaWAN SENSORS- Mode d'emploi / User guide version V2.0

1. PRODUCT PRESENTATION

IMPORTANTE NOTE : the LoRaWAN SENSORS can only be started or restarted using a magnet.
Description
• ADEUNIS RF's LoRaWAN SENSORS is a ready-to-use radio transmitter enabling any type of 0-10 V, 4-20 mA or On-Off sensor to be trans-
formed into a wireless sensor.
• This product fulfils the needs of users who wish to remotely supervise all sorts of data (temperature, pressure, level, humidity, CO2, speed,
luminosity, opening, etc.).
• Two sensors may be controlled by a single Adeunis RF LoRaWAN SENSORS transmitter thus permitting a significant reduction in implemen-
tation and deployment costs.
• This document contains essential recommendations for the optimal implementation of ADEUNIS RF's LoRaWAN products. Following these
recommendations will enable you to obtain communication over the distances advertised by the manufacturer according to the model
chosen.
• LoRaWAN SENSORS transmitters use a Lithium battery guaranteeing a product life in excess of 10 years under normal conditions of use.
IMPORTANT NOTE 1: The LoRaWAN SENSORS is delivered with an OTAA default configuration, allowing the user to declare its product to a
LoRaWAN network operator. If the ABP procedure is needed, please contact the sales department with relevant information.
IMPORTANTE NOTE 2 : LoRaWAN Sensors enables you to transmit measurements from sensors but does not power them (except for the On-
Off version)
Composition of the package
The product is delivered in a cardboard package containing the following items:
• The upper casing, the electronic board, and the casing base.
• The packing gland nut,3 packing gland seals, 2 CBLZ 2.2 x 19 mm screws, and 2 Fischer SX4 wall plugs.

1.1. General description

Casing base
Antenna
2 holes for
passing collars
through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
GB
Cables outlet
packing gland
Page 30 of 45