Publicité
Les langues disponibles
Les langues disponibles
Pressing the blue button (2) will enable or disable a local intercom to the machine room
connection only. During this call LED (4) will flash slowly and once the communication
is established it will stay solid for the duration of the call.
Local EOA (End of Alarm)
EOA signifies the end of the alarm and rescue process and the device
can revert to standby mode. It is possible to generate an EOA locally
by pressing the two buttons (yellow and blue) simultaneously. The
device will go into standby and the yellow LED will turn off.
LED 3
OFF
Device is in standby mode
LED 4
OFF
Device is in standby mode
DIMENSIONS
ON
Device is in the alarm mode
ON
Flashing - Slow
Emergency
Internal
Internal/External
communication is
Communication is
activated
active
Flashing - Quick
The emergency
communication has
been activated by
another device on
system connected by
LPBus
4
Publicité
