ETI GROW ELITE GEGH-600W-FS Guide D'utilisation Et D'entretien page 6

installation (continued)
7
Install the driver on the metal board.
□ Hang the bracket over the support structure and tighten the bracket by screws.
C
S Hook
E
A
8
Connect the power cord
□ Plug the power connecting cord (B) into the end of the grow light (A) and then plug the other end of the power connecting
cord (B) into the grow light driver (E). Plug the power cord (F) into the end of the grow light driver (E) and then plug the
other end of the power cord (F) into an electrical outlet.
B
D
E
C
F
A
6