Publicité
Les langues disponibles
Les langues disponibles
1. Place the precision trimmer on the appliance, as indicated in section Changing accessories.
2. In order to shave off hair without completely removing it, attach the attachable comb to the precision trimmer. This is done by first
placing the top side of the precision trimmer in the comb and then snapping the comb on the trimmer.
3. Switch on the appliance.
4. Carefully and evenly move the razor head over the skin, in the opposite direction to the hair growth.
5. Switch off the appliance once you are finished shaving and place the comb on the razor head, it also serves as protective cover.
Clean the appliance after each use. This is not only beneficial for the life span of the appliance, it also ensures a better function of the
appliance.
Cleaning should involve the following:
• Check that the appliance has been switched off and that the battery has been removed from the appliance.
• Remove the accessories from the appliance, leave the underside of the appliance connected.
• Brush clean the accessories and the appliance with the supplied cleaning brush.
Note that you can loosen the top side of the razor head by turning it to position
the razor head. When placing back the top side, make sure the triangles are pointing to each other
by turning it to position
• Clean the separate accessories (not the appliance itself ) under running water.
• Clean the exterior of the appliance by wiping it clean with a soft cloth.
• Allow all accessories to dry properly before they are attached to the appliance again.
Using the precision trimmer
Cleaning and maintenance
.
. In this way you can also clean the interior of
21 • EN
and then fasten the top side
Publicité
