Publicité
Les langues disponibles
Les langues disponibles
Changing accessories
1. Always first check that the appliance has been switched off and that the battery has been removed from the appliance.
2. Disconnect the accessory from the appliance by turning it to position:
3. Place the required accessory on the appliance, making sure the triangles are pointing to each other:
4. Fasten the accessory by turning it to position:
5. Place the battery back in the appliance, as indicated in section Placing the battery.
Switching on/off
Before switching on the appliance, check that the accessory is placed correctly on the appliance and remove any protective cover from
the accessory.
In order to switch on the appliance, turn the underside of the appliance to position:
In order to switch off the appliance, turn the underside of the appliance to position:
After switching off the appliance, place the protective cover back on the accessory.
Using the razor head
1. Place the razor head on the appliance, as indicated in section Changing accessories.
2. Remove the protective cover from the razor head and switch on the appliance.
3. Carefully move the razor head over the skin, in the opposite direction to the hair growth.
4. If necessary, use your free hand to pull the skin taut and move the razor head in vertical direction over the area to be shaved.
5. Switch off the appliance once you are finished shaving and place the protective cover back on the razor head.
19 • EN
Publicité
