Publicité
Les langues disponibles
Les langues disponibles
The eyebrow trimmer has a razor blade on 2 sides, a 17 mm long blade for trimming body hair and a 6 mm short blade that is ideal for
precision trimming. The provided attachable comb also has 2 sides, the longer teeth for trimming at a length of 6 mm and the shorter
teeth for a length of 3 mm. The trim length is indicated on the top side of the comb. Select the required options on the basis of the
area to be trimmed and the required result.
For trimming eyebrows, proceed as follows:
1. Place the eyebrow trimmer on the appliance, as indicated in section Changing accessories.
2. Remove the protective cover from the eyebrow trimmer and place the attachable comb on the eyebrow trimmer.
3. Switch on the appliance.
4. Carefully move the eyebrow trimmer with comb over the eyebrow, in the opposite direction to the hair growth.
5. Switch off the appliance once you are finished shaving, remove the comb and place the protective cover back on the eyebrow
trimmer.
For refining the shape of the eyebrows, proceed as follows:
1. Place the eyebrow trimmer on the appliance, as indicated in section Changing accessories.
2. Remove the protective cover from the eyebrow trimmer and switch on the appliance.
3. Carefully move the eyebrow trimmer with the required razor blade along the outer edge of the eyebrow. Move both in the direction
of the hair growth and in the opposite direction to the hair growth. This allows you to shave the eyebrow in the correct shape with
precision.
4. Switch off the appliance once you are finished shaving and place the protective cover back on the eyebrow trimmer.
Using the eyebrow trimmer
20 • EN
Publicité
