Anynet - Samsung 6 Serie Mode D'emploi

Advanced Features
t
What is Anynet ?
+

Anynet

is a function that enables you to control all connected Samsung devices that support Anynet
+
remote. The Anynet system can be used only with Samsung devices that have the Anynet
+
device has this feature, check if there is an Anynet
To connect to Home Theatre
1. Connect the HDMI IN (1(DVI), 2, 3
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet
HDMI cable.
✎
NOTE
x
Connect the Optical cable between the
on the Home Theatre.
x
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
from the Home Theatre's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OPTICAL)
Amplifier or Home Theatre, not the TV.
x
Connect only one Home Theatre.
x
You can connect an Anynet
x
Anynet works when the AV device supporting Anynet
+
x
Anynet supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
+
Anynet Menu
+
The Anynet menu changes depending on the type and status of the Anynet
+
Anynet Menu
+
View TV
Device List
Recording: (*recorder)
(device_name) MENU
(device_name) INFO
Stop Recording: (*recorder)
Receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
36
English
logo on it.
+
TV
Optical Cable
or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet
DIGITAL AUDIO OUT (OPTICAL)
jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
device using the HDMI cable. Some HDMI cables may not support Anynet
+
Description
Changes Anynet mode to TV broadcast mode.
+
Shows the Anynet device list.
+
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Stops recording.
Sound is played through the receiver.
Anynet
+
Home Theatre
HDMI 1.3 Cable
HDMI 1.3 Cable
jack on your TV and the Digital Audio Input
is in the standby or on status.
+
devices connected to the TV.
+
with your Samsung TV's
+
feature. To be sure your Samsung
+
Anynet Device 1 Anynet Device 2, 3, 4
+ +
device using an
+
+
device using
+
functions.