Samsung 6 Serie Mode D'emploi page 25

Connecting Wireless Network
¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN), which you connect to your TV's back or side panel USB jack. See the illustration below.
✎
To use the SWL(Samsung Wireless Link) function, connect to the
The LAN Port on
the Wall
LAN Cable
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
✎
NOTE
x
You must use the "Samsung Wireless LAN Adapter" (WIS09ABGN) to use a wireless network.
x
Samsung's Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
x
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
x
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
x
If you apply a security system other than the systems listed blow, it will not work with the TV.
x
When connecting Samsung Wireless Lan Adapter to TV in 802.11N mode, WEP/TKIP/TKIP-AES (WPA2Mixed) is not
supported.
x
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
x
If the device is not certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter."
x
Connection Methods
– Samsung Auto Configuration
– PBC (WPS)
– Auto Setup (Using the Auto Network Search function)
– Manual Setup
– SWL (Samsung Wireless Link)
– Ad-Hoc
x
All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not
supported.
Wireless IP sharer
: You can setup the wireless network connection on six ways.
USB 1 (HDD) port.
Samsung Wireless
or
LAN Adapter
TV Side Panel
25
English