LaserLiner ThermoControl Air Mode D'emploi page 11

Insert probe in item to be measured
4
To avoid damage, the probe must always be inserted into
!
the item to be measured up to the marking and the core
temperature may not exceed a temperature of 85°C.
Data transfer
The device features a Bluetooth
data transfer to mobile devices with a Bluetooth
(such as a smartphone or tablet).
The system prerequisites for a Bluetooth
at http://laserliner.com/info?an=ble
The device can set up a Bluetooth
compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as
the thickness and composition of walls, sources of interference
as well as the transmit / receive properties of the terminal device.
Application (app)
An app is required to use the Bluetooth
function. You can download the app from
the corresponding stores for the specific type
of terminal device:
!
Make sure that the Bluetooth
device is activated.
Bluetooth is always activated once the probe is removed from
®*
the charger. A mobile device can connect to the removed probe
via an app.
0°C ... 300°C
ThermoControl Air
0°C ... 85°C
function that enables wireless
®*
connection are specified
®*
connection with Bluetooth 4.0
®*
®*
interface of the mobile
®*
Marking
interface
®*
EN
11