Adjustment Items - Mitsubishi Diamond Pro 2060u Mode D'emploi

4.2

Adjustment Items

Group Item
Icon Icon
(COLOR)
COLOR TEMPERATURE
FINE PICTURE MODE
FACTORY PRESET
AUTO SIZE ADJUST
(GEOMETRY)
HORIZ-POSITION
VERT-POSITION
GTF AUTO ADJUST
FACTORY PRESET
PINCUSHION
PIN-BALANCE
(DISTORTION)
KEY-BALANCE
TOP-BALANCE
BOTTOM-PIN
BOTTOM-BALANCE
VERT-LIN-BALANCE
FACTORY PRESET
A. Press "FACTORY PRESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
＋
−
C. Set data does not change by the change of the signal timing.
Press the Minus Button
Item
CONTRAST To decrease the contrast.
BRIGHT
To decrease the brightness.
To select preferable display color mode. And, to adjust the color balance at the
COLOR
selected color mode.
When selecting mode "sRGB", "COLOR TEMPERATURE", "CONTRAST" and "BRIGHT" are unavailable.
To decrease the color temperature of the
color mode selected by "COLOR"
Selects the status which provides the most pleasing image.
NORMAL MODE
TEXT MEDE
GRAPHIC MODE
"AUTO SIZE ADJUST" is unavailable when no image signal or narrow size of the image signal are inputted.
To narrow the width of the image on the
HORIZ-SIZE
screen.
To move the image on the screen to the
left.
To narrow the height of the image on the
VERT-SIZE
screen.
To move the image down.
To rotate the image counterclockwise.
ROTATION
"GTF AUTO ADJUST" is available when using with the computer which VESA GTF function is installed.
If a non-Factory Preset timing is used, "FACTORY PRESET" is unavailable.
To collapse the center of the image.
To move the top and bottom of the
screen image to the right.
To decrease the width at the top of the
screen image and to increase the width at
KEYSTONE
the bottom.
To make the screen slant to the left.
To expand the width of the screen image
TOP-PIN
near the corners of top.
To make the screen slant to the left at
the top.
To expand the width of the screen image
near the corners of bottom.
To make the screen slant to the left at
the bottom.
To vertically compress the center of the
VERT-LIN
screen and expand the top and bottom.
To vertically expand the bottom of the
screen and compress the top.
If a non-Factory Preset timing is used, "FACTORY PRESET" is unavailable.
− ＋
To increase the contrast.
To increase the brightness.
To indecrease the color temperature of the
color mode selected by "COLOR"
for normal use
for image using many letters or characters
for graphic and photographic images.
To restore to factory preset level.
To adjust the screen size automatically
based on input timming.
To expand the width of the image on the
screen.
To move the image on the screen to the
right.
To expand the height of the image on
the screen.
To move the image up.
To rotate the image clockwise.
To adjust the screen size automatically
based on GTF timming.
To restore to factory preset level.
To expand the center of the image.
To move the top and bottom of the
screen image to the left.
To increase the width at the top of the
screen image and to decrease the width at
the bottom.
To make the screen slant to the right.
To narrow the width of the screen image
near the corners of top.
To make the screen slant to the right at
the top.
To narrow the width of the screen image
near the corners of bottom.
To make the screen slant to the right at
the bottom.
To vertically expand the center of the
screen and compress the top and bottom.
To vertically compress the bottom of the
screen and expand the top.
To restore to factory preset level.
-1-10 -
X: Available
Press the Plus Button
− ＋
A B C
X X X
X X X
X X X
X X X
- - -
- - -
X X
X X
X X
X X
X X X
- - -
- - -
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
- - -