Mitsubishi Diamond Pro 2060u Mode D'emploi page 14

Item
Group
Item
Icon
Icon
CORNER PURITY(TL)
CORNER PURITY(TR)
(PURITY)
CORNER PURITY(BL)
CORNER PURITY(BR)
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
FACTORY PRESET
HORIZ-CONVERGENCE
VERT-CONVERGENCE
(CONVER.)
FACTORY PRESET
DEGAUSS
INPUT
POWER SAVE
(MISC.)
CONTROL LOCK
OSD POSITION
OSD TURN OFF
DIAGNOSIS
LANGUAGE
AUTO SAVE
ALL RESET
FACTORY PRESET
NOTE
If a non-Factory Preset timing is used, "FACTORY PRESET" does not work.
Press the Minus Button
−
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may occur when
both Sync-On green and external sync signals are applied to the monitor.
To clamp the video signal at the
front of the H-Sync pulse.
To adjust the horizontal beam alignment on the full screen area.
To adjust the vertical beam alignment on the full screen area.
To select the signal input connector, SIGNAL A or
To select the constant power
consumption mode.
To unlock the OSD adjustments.
"BRIGHT" and "CONTRAST" are available at the locked condition.
To move the OSD screen position in
a counter clockwise direction.
To adjust the time that the OSD screen disappear when no access.
Indicates the current scanning frequency, factory or user preset timing
number, and signal iput connector.
To choose the language used on OSD.
ENG.....English,
ESP.....Spanish,
To save the new setting automatically.
When selecting "OFF", if "SAVE" is not done before the OSD screen disappeared, the new
setting is invalid.
- 1-11 -
Press the Plus Button
＋
To clamp the video signal at the back of the H-
Sync pulse. If you connect to an older
Macintosh, you may need to press plus button.
To restore to factory preset level.
To restore to factory preset level.
To eliminate possible color shading
or impurity due to magnetic effects.
To select the power-save mode.
(Your computer must be set for
power management.)
To lock the OSD function except
for "BRIGHT" and "CONTRAST".
To move the OSD screen position in
a clockwise direction.
GER.....German, FRA.....French,
ITA ..... Italian, .....Japanese
To save the new setting with a
comfirmation message.
Restores all items to the factory
preset level.
To restore to factory preset level.
X: Available
A B C
− ＋
X X X
X X X
X X X
X X X
X X
X
- -
X X X
X X X
- -
- -
X
X
X X X
- -
- -
- -
-
-
-
X
X
X
-
X
X
-
-