Hailo 1-2-3 500 Instructions De Montage page 6

Hailo 1-2-3 500 Aluminium scaffolding (9459-551)
Foreword
Dear Customer,
Congratulations on your purchase of the
Hailo 1-2-3 500 aluminium scaffolding.
We hope you enjoy using this versatile
and sturdy scaffolding unit.
This aluminium scaffolding meets the
requirements of the NF E85-200 standard.
Please read these assembly instructions
thoroughly before using the scaffold, paying
particular attention to the safety instructions
on page 30.
Please keep these assembly instructions in a
safe place.
If you have any questions or comments
about our aluminium scaffolding,
please don't hesitate to call us.
We'd be delighted to assist.
Hailo-Werk, Rudolf Loh GmbH & Co. KG
Daimlerstraße 8, 35708 Haiger, Germany
+44 1792 701999
Email: info @ hailo.de
www.hailo.de
6
This aluminium scaffolding is
designed exclusively for domestic use.
Read the assembly instructions
carefully before use and keep them
in a safe place.
1 Pictograms illustrating safety instructions
Pay particular attention to the safety instructions!
2 Parts overview
3 Pre-assembly
A) Preparing the horizontal and diagonal struts
1. Pre-fit two "Speed Lock" one-handed quick lock systems to
each strut.
2. Tighten the self-locking nuts to ensure that the washer is up
against the threaded bolt.
3. Then check that the quick lock functions properly.
4. Pay attention to the position where it is fitted.
B) Preparing the working platform
Pre-fit 2 sets of hooks to the working platform
(positioned diagonally).
C) Installation of ladder elements
1. Attach protective caps at top and bottom.
2. Fit the cross piece to ladder section [1].
3. Secure the cross piece with the set of castors to ladder section [2].
4. Insert lower ladder sections into the ladder stringers of the top
ladder sections [3] [4] and screw both elements together.
Pages 30 / 31
Pages 32 / 33