Software - DNT DigiMicro Profi II Mode D'emploi

Software installation
Install the software
Insert the driver CD into CD-ROM Drive.
Open the directory for Windows and click MicroCapture_Plus.exe. The installation wizard
will guide you through the whole process.
If your OS is Windows 7 please install the patch for Windows 7 MJPGDecodeRFilter_
V1.1.exe.
Full user's manual can be viewed by clicking User's Manual.
Connect your Microscope to your PC USB port, start the software by clicking the Micro-
capture Plus icon generated on the desktop after installation and you will see the following
screen pop up.
When the Microscope is disconnected from your PC USB port, the following message will
pop up: No Device detected.Please connect your Microscope directly to your PC USB
port.
Software microcapture Plus
The user inferface is multiligual. To change the language select Options > Language >
English.
The captured image is displayed on the right side as a thumbnail.
If the mouse moves over a thumbnail, the image is shown in the preview window.
The right mouse button shows a submenu where you can open, save, copy and delete the
photo. Open will open the photo in the preview window. Save or Save as will open a dialog
window to browse a folder of your choice. Copy will copy the photo to the clipboard. Delete
to delete the current photo. Delete all to delete all photos from the list.
To take a photo press snapshot button or the camera icon above the preview window. The
- 26 -