Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
By DMX
When using a universal DMX controller to control the chain of units, you have to set DMX
address by Dip switches from 1 to 9.
For DMX control , select the DIP SWITCH 10 "ON", and then select your DMX address
with DIP SWITCHES 1 to 9.
DMX Channels
Channel
Value
16-249
CH1
250-25
CH2
0-255
CH3
11-255
CH4-----CH
36-49
12
50-255
CH13
36-49
0-5
Open (CH4 - cH14) control is effective
15
6-15
circulation
15
kinds
choose one of them
Sound
invalid.
(CH3 < = 10: hold mode when no strobe or no noise);
5
(Ch3 > 10: the lights off if no sound , CH2 = 0-4 has a
strobe, CH2 = 5-255 no strobe);
Speed setting: from slow to fast
0-10
No strobe,
Have a strobe: Strobe speed setting: from slow to fast,
CH2 is invalid
0-35
LED put out
LED automatic change (speed, strobe is affected by
CH2 and CH3)
Choose graphic pattern (strobe is affected by CH3)
0-35
(CH4 - CH12) effective
Total
automatically (speed, strobe is affected
Function
programs
of
effects,
control status
CH2 effectively
control
of
the
(CH4 - CH14) control is
invalid
(CH4 - cH14) control is
LED
changes
(CH4 -
CH12) is
12
Publicité
Table des Matières
