About This Documentation; Product Description; Technical Data - AL-KO 351 PLUS Traduction Du Mode D'emploi Original

en
TRANSLATION OF THE ORIGINAL
OPERATING INSTRUCTIONS
Contents
About this documentation................................ 12
Product description.......................................... 12
Technical data.................................................. 12
Safety instructions............................................13
Installation........................................................ 13
Operation..........................................................15
Maintenance..................................................... 15
Repair............................................................... 16
Troubleshooting................................................ 16
EC Declaration of Conformity.......................... 17

ABOUT THIS DOCUMENTATION

Please read this document before use. This
is essential for safe working and trouble-free
handling.
Comply with the safety and warning instruc-
tions in this documentation and on the pro-
duct.
This document is a permanent component
of the described product, and should remain
with the machine if it is sold to someone else.
Explanation of symbols
CAUTION!
Following these warning instructions can
help to avoid personal injuries and/or da-
mage to property.

TECHNICAL DATA

type series plus
Max. load Traction (N)
Lowest rope layer (F
Top rope layer (F )
6/7/9
Gear reduction
Rope*
Minimum breaking force (F min)
Drum capacity (m)
Strap** (mm)
Minimum breaking force (F min)
Drum capacity (m)
12
)
1
Special notes for ease of understanding
and regarding handling.

PRODUCT DESCRIPTION

Proper use
The winches of type series: Plus
351 standard
501 standard / automatic unwinder
901 standard / automatic unwinder
901D with double crank
1201 with automatic unwinder
are only to be used to lift, lower and pull the loads
listed in the technical data provided.
Foreseeable misuse
Winches are not permitted for:
Stages and studios (DGUV regulation 17)
Hoistable
(DGUV regulation 101-005)
Construction hoists
Motor operation
Continuous operation
Winches are not permitted in:
Potentially explosive atmosphere
Corrosive atmosphere
351 501
3500 N 5000 N
1500 N 1700 N
2,5 : 1 3,75 : 1
Ø4 mm Ø5 mm
10,5 kN 15 kN
15 m 20 m
35-50x1,6 35-45x2,5
24,5 kN 35 kN
3 m 3,5 m
personnel lifting
901D 901
6500 N 9000 N
3300 N 3300 N
8,75 : 1 8,75 : 1
Ø7 mm Ø7 mm
27 kN 27 kN
17 m 17 m
50x2,5 50x2,5
63 kN 63 kN
6 m 6 m
equipment
1201
11500 N
5000 N
10,5 : 1
Ø7 mm
34,5 kN
25 m
55x3,5
80,5 kN
9 m
352921_f