Axis P13-E Serie Mode D'emploi page 24

AXIS P13-E Series
1
Desiccant bag
8. Close the housing. Make sure to alternately tighten the bottom cover screws a few turns
at a time until they are tight (torque 1.5 Nm). This will help ensure that the bottom
cover gasket is compressed evenly.
NO TICE TICE
NO NO TICE
Make sure not to pinch any cables when closing the housing.
9. If required, loosen the screws on the weather shield, adjust its position and tighten
the screws.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
The product can be used with most operating systems and browsers. The recommended browsers are
• Internet Explorer
®
• Safari with OS X
TM
• Chrome or Firefox
For more information about using the product, see the User Manual available at www.axis.com
Adjust focus
Follow these instructions to set the focus and zoom.
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see Adjust focus with the Focus Assistant on page 25.
1. Open the product's home page and go to Setup > Basic Setup > Focus.
2. Under the Basic tab, click Open iris. If the button is inactive the iris is already open.
3. If focus has been set before, click Reset to reset the back focus.
® ®
with Windows
®
®
with other operating systems.
24