Using The Appliance - Philips 5000 Serie Manuel D'utilisation

Using the appliance

Turning the shaver on and off
Shaving
Note: You cannot use the appliance while it is
charging.
Charging with the power cord
Make sure the product is turned off.
1
2 Insert the small plug into the appliance and put the
supply unit in the wall socket.
The display of the shaver indicates that the shaver
is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Warning: Always check the appliance before you
use it. Do not use the appliance if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
Note: The appliance can only be used without cord.
- To switch on the shaver, press the on/off button
once.
- To switch off the shaver, press the on/off button
once.
After switching the shaver off, the display lights up
for a few seconds and shows the remaining
battery.
This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can therefore
only be used without cord.
- For the best results on skin comfort, pre-trim your
beard if you have not shaved for 3 days or longer.
11
English