Var Function (Voice Activated Recorder) - Sangean DAR-101 Mode D'emploi

VAR function (Voice Activated Recording)
1. Press the Menu button to enter the main menu.
2. Rotate the Tuning control until RECORD SETUP is highlighted,
and press the Enter button to enter the setting.
3. Rotate the Tuning control until RECORD VAR is highlighted,
and press the Enter button to enter the setting.
4. Rotate the Tuning control until VAR SET is highlighted, and press the
Enter button to enter the setting. Then rotate the Tuning control to
choose ON and press the Enter button to activate the VAR function.
5. Rotate the Tuning control until VAR SENS is highlighted, and press
the Enter button to enter the setting of VAR sensitivity.
Sensitivity can be set on LOW, MID and HIGH. High is the most
sensitive and can be used when there is little background noise and
you would like to record people in a room, such as a meeting.
GB
18