Recording From An External Device - Sangean DAR-101 Mode D'emploi

Recording Instructions

Recording from an external device

The DAR-101 can be used with any audio device that has a headphone
jack or Line Out.
1. First press and hold the power button to turn on the recorder.
2. Ensure an SD card with sufficient space is inserted correctly in the
SD card slot.
3. Plug a 3.5mm stereo audio dispatch cord into the Line Out or
headphone jack of your external audio device, and into the Line In of
your DAR-101.
4. Rotate the Recording Level control to adjust the recorder's recording
level to an appropriate level. If the recording level of the recorder is
set too loud, the recorded sound may be distorted and the peak
indicator will flash. Rotate the Balance control accordingly to adjust
the balance of the recording to pan left or right accordingly.
5. Press and hold the Record button, and the recorder will start
recording from your external audio device.
6. Press the Stop button when you want to finish the recording.
7. Press the Play/pause button and the recorder will begin playing what
is just being recorded.
8. Adjust the volume of your recorder to an appropriate level by rotating
the Volume Control.
4
5
6
7
8
14
GB